SteelFill

Owned by Imagine That
Jan 06, 2022
1 min read

DateSheets:

TECHNICAL SPECIFICATIONS

  • Printing Temperature: 200C - 215C

  • Heated Bed: 50C (A heated bed is not necessary to print SteelFill but if your 3D printer has a heated built plate we recommend setting it to 50C)

  • Printing Speed: 50-70mm/s

  • The steel content of this filament makes is very abrasive, causing a lot of wear for standard brass nozzles. It is recommended to use a hardened steel nozzle when printing with SteelFill and other abrasive filaments.

TIP! Steel nozzles
The high steel content of the steelFill material makes this filament quite abrasive to brass nozzles. It’s not as bad as the carbon fiber, XT-CF20 materials, but can affect the print quality after printing 1.5 kg. Therefore it’s recommended to print with abrasive resistant nozzles, for instance, the E3D hardened steel nozzle, the JET RSS50 and performance 3-d Hercules nozzles.