Burning programming procedures

Owned by Imagine That
Jun 12, 2021
2 min read

Here provide a way to Burning programming procedures,this way is simple and not required Arduino.



1, Connect the motherboard to PC, this progress has a step to install the driver. 

If your computer could not find the driver. pls do as fllow: unzip the ”drivers” in the MICROMAKE file, and if your computer is 32 bit, install the file “ dpinst-x86”, if your computer is 64 bit, install the file “ dpinst-amd64 ”, in a word ,ensure usb connection is ok.



You could open the Device Manager, check whether has the Arduino Mega 2560, the port is uncertain,maybe COM 3,COM 4,COM6.

 

 

2,open the file MICROMAKE, install the “Cura_15.02.1”, as the pic shows.

 

 

 





 

 

 



3,Burning programming procedures



Check the Machine-Install default firmware

This is progress

Complete firmware install