Palette 3

Owned by Imagine That
Dec 05, 2022
3 min read

 

Palette 3 - the reliable Multi-Material system

With a simple plug-and-play setup, Palette 3 enables your printer to print multiple colors in one print, combine flexible and rigid materials together, and achieve high-quality complex prints with soluble supports.

 

 

Palette 3 Printer Compatibility

Palette 3 (Pro) has 3 requirements for compatibility:

  • printer uses non-proprietary filament

  • printer uses 1.75 mm filament

  • printer is compatible with Canvas or PrusaSlicer, if you are using the P2PP plugin - Palette 3 Pro can only be used with these two slicers

If your printer is not on this list and you are not sure if it meets the compatibility requirements, please contact us at support@mosaicmfg.com.

Make

Models

Accepts non-proprietary 1.75mm Filament

Material Compatibility

Uses supported file format

Compatible with Palette

Notes

Make

Models

Accepts non-proprietary 1.75mm Filament

Material Compatibility

Uses supported file format

Compatible with Palette

Notes

3D Systems

CubePro (+ Duo, Trio)

Yes

Yes

No (.cubepro)

No

Proprietary filament and file type

3DKreator

Motion

Yes

Yes

Yes

Yes

 

3DMakerWorld

Artifex, 2

Yes

Yes

Yes

Yes

 

Afinia

H800, H479

Yes

Yes

Yes

Yes

 

Airwolf3D

AXIOM 20 Dual Direct Drive

No

Yes

Yes

No

2.85 mm

Alfawise

U20

Yes

Yes

Yes

Yes

 

Anet

A6, A8 ET5 Pro

Yes

Yes

Yes

Yes

 

Anycubic

Delta, Kossel Plus, Chiron, Mega-s, i3-Mega, Mega X, 4Max, Kobra, Kobra Max, Vyper

Yes

Yes

Yes

Yes

 

Artillery

Sidewinder X1

Yes

Yes

Yes

Yes

 

ATOM3DP

ATOM 2.0

Yes

Yes

Yes

Yes

 

BCN3D

Sigma R17, R19

No

Yes

Yes

No

Uses 2.85 mm filament; may be able to switch hot end

BEEVERYCREATIVE

BEETHEFIRST, BEETHEFIRST+, BEEINSCHOOL, helloBEEprusa

Yes

Yes

Yes

Yes

#

BIQU

B1

Yes

Yes

Yes

Yes

 

Blackbelt-3D

Blackbelt

Yes

Yes

 

No

Uses special version of Cura for slanted bed. Currently not compatible due to slanted print bed

BQ

Hephestos 2, Witbox 1, Witbox 2

Yes

Yes

Yes

Yes

 

CEL

Robox

Yes

Yes

No

No

Proprietary file type

Cetus

Cetus3D

Yes

Yes

Yes

Yes

Firmware uses different Z-axis properties

Cocoon Create

Touch, Model Maker

Yes

Yes

Yes

Yes

 

CoLiDo

X3045, M2020, 2.0+, Compact, DIY

Yes

Yes

Yes

Yes

 

CraftUnique

Craftbot

Yes

Yes

Yes

Yes

 

Creality

CR (6 SE, 6 Max, 10, 10S, 10 Max, 10 V3, 10S Pro, 10S Pro V2, 20 Pro, 200-B); Ender (3, 3 V-2, 3 Pro, 3 Max, 3X, 3 Pro X, 3 S1, 3 S1 Pro, 3 S1 Plus, 3 V2 Neo, 5 Plus, 5 Pro, 6); Sermoon D1

Yes

Yes

Yes

Yes

Please note that while you can use Palette in multi, random, or gradient mode with belt printers, they are not compatible for calibrated prints

CreatBot

DE Plus, DX - Doble Dyser, DX Plus Doble Dyser

Yes

Yes

Yes

Yes

3 mm Bowden, but can print 1.75

CTC Ltd

Bizer, II, III, CTC-3D

Yes

Yes

Yes

Yes

 

Cubicon

Single (and Single Plus)

Yes

Yes

Yes

Yes

 

Cultivate3D

The Beast

Yes

Yes

Yes

Yes

 

Dagoma

Discovery 200, DiscoEasy 200

Yes

Yes

Yes

Yes

 

Deezmaker

Bukito

Yes

Yes

Yes

Yes

 

Deltaprintr

Delta Go

Yes

Yes

Yes

Yes

 

Dremel

Dremel 3D20, 3D40, 3D45

Yes

Yes

Yes

Yes

Dremel uses .g3drem file. Select in printer profile on Canvas.

Dynamo3D

ONE-PRO

No

Yes

Yes

No

Uses 2.85 mm filament

Elegoo

Neptune 3

Yes

Yes

Yes

Yes

 

Febtop Tech

Optimus

Yes

Yes

Yes

Yes

 

Felix

3L, Pro 1, Pro 2

Yes

Yes

Yes

Yes

 

Flashforge

Adventurer (1 & 2), Creator, Creator Pro, Dreamer, Finder, Guider (I & II)

Yes

Yes

Yes

Yes

 

Flashforge

Adventurer 4

Yes

Yes

Yes (.gx)

No

Does not support extruder reset before transition tower movements

FLSUN3D

Kossel Delta, Prusa i3, Large Print Area, (SR) Super Racer, V400

Yes

Yes

Yes

Yes

 

FLUX

Delta

Yes

Yes

Yes

Yes

 

Flying Bear

P902

Yes

Yes

Yes

Yes

 

Folger Tech

Cloner, RepRap 2020, FT-5

Yes

Yes

Yes

Yes

 

Formbot

T-Rex 1, 2, 2+

Yes

Yes

Yes

Yes

 

Fusion3

F400, F410

Yes

Yes

Yes

Yes

 

gCreate

gMax 1.5+

Yes

Yes

Yes

Yes

 

Geeetech

i3, Rostock 301

Yes

Yes

Yes

Yes

 

German RepRap

X400 Pro

Yes

Yes

Yes

Yes

 

GP3D

Root, Root Plus

Yes

Yes

Yes

Yes

 

GTMax3D

Core A3, A1

Yes

Yes

Yes

Yes

 

Hatchbox

Alpha

Yes

Yes

Yes

Yes

 

HE3D

Ei3

Yes

Yes

Yes

Yes

 

Hesine 3D

M-505-B

Yes

Yes

Yes

Yes

 

HIC Technology

Hictop 3DP-17

Yes

Yes

Yes

Yes

 

IMADE3D

Jellybox

Yes

Yes

Yes

Yes

 

Instone

Inventor Pro

Yes

Yes

Yes

Yes

 

Intamsys

Funmat HT

Yes

Yes

Yes

Yes

 

JennyPrinter3

Extended, Z360

Yes

Yes

Yes

Yes

 

JGAurora

Z603S

Yes

Yes

Yes

Yes

 

KLIC-N-PRINT

3D Printer

Yes

Yes

Yes

Yes

 

Kodak

Portrait

Yes

Yes

Yes

Yes

 

Kodama

Trinus

Yes

Yes

Yes

Yes

 

Leapfrog

Creatr

Yes

Yes

Yes

Yes

 

Leon3D

Lion Pro 3D

Yes

Yes

Yes

Yes

 

Longer

LK5 Pro

Yes

Yes

Yes

Yes

 

LulzBot

Mini, TAZ 5, TAZ 6

No

Yes

Yes

No

Uses 2.85 mm filament

M3D

M3D Pro, Micro

Yes

Yes

Yes

Yes

 

Makeit, Inc.

Pro-L, Pro-M

Yes

Yes

Yes

Yes

 

MakerBot

Replicator 2, Z18, Replicator +, 5th Gen

Yes

Yes

Yes

Yes

 

MakerFarm

Pegasus

Yes

Yes

Yes

Yes

 

MakerGear

M2, M3

Yes

Yes

Yes

Yes

 

Malyan Systems

M200

Yes

Yes

Yes

Yes

 

Mass Portal

Pharaoh ED, Pharaoh XD

Yes

Yes

Yes

Yes

 

MatterHackers

Pulse (XE)

Yes

Yes

Yes

Yes

 

MeCreator

2

Yes

Yes

Yes

Yes

 

MendelMax

3.0

Yes

Yes

Yes

Yes

 

Mingda

Magician Pro

Yes

Yes

Yes

Yes

 

Monoprice

MP Select Mini, Maker Select, Ultimate

Yes

Yes

Yes

Yes

 

Neo

3D

Yes

Yes

Yes

Yes

 

New Matter

MOD-t

Yes

Yes

Yes

Yes

 

Omni3D

Factory 2.0

No

No

Yes

No

 

PowerSpec

Pro, Pro 2, Ultra

Yes

Yes

Yes

Yes

 

Prenta

Duo, Duo XL

Yes

Yes

Yes

Yes

 

Printrbot

New Simple Pro, Play, Plus, Simple Metal

Yes

Yes

Yes

Yes

 

Prusa

MK2, MK3, MK3S(+), Mini (+)

Yes

Yes

Yes

Yes

 

Qidi Tech

Tech 1, Tech X-one, X-Max

Yes

Yes

Yes

Yes

 

R3Dit

R3D-335/20

Yes

Yes

Yes

Yes

 

Raise3D

N1, N2, N2+, Pro2, Pro2 Plus

Yes

Yes

Yes

Yes

 

RigidBot

Big

Yes

Yes

Yes

Yes

 

Robo 3D

R1, R1 Plus, C2, R2

Yes

Yes

Yes

Yes

 

SeeMeCNC

Rostock MAX, v2, v3, Artemis 300

Yes

Yes

Yes

Yes

 

Sethi3D

S3

Yes

Yes

Yes

Yes

 

Shining 3D

EinStart-S, EinStart-L

Yes

Yes

No

No

Proprietary software (3dStart)

Sindoh

3DWOX DP200, DP201

Yes

Yes

Yes

Yes

 

Snapmaker

Snapmaker

Yes

Yes

Yes

Yes

 

Solidoodle

Solidoodle 4

Yes

Yes

Yes

Yes

 

Sovol

SV01

Yes

Yes

Yes

Yes

 

SpiderBot

v2.2 Standard, Pro

Yes

Yes

Yes

Yes

 

Startt

3D printer

Yes

Yes

Yes

Yes

 

TEVO

Black Widow, Delta, Tarantula i3

Yes

Yes

Yes

Yes

 

Tiertime (pp3dp)

UP Box

Yes

Yes

Yes

Yes

 

Tinkerine

Pro, Plus

Yes

Yes

Yes

Yes

 

TRILAB

DeltiQ, DeltiQ 2

Yes

Yes

Yes

Yes

 

Tronxy

P802E, X3, Gemini, X5SA Pro

Yes

Yes

Yes

Yes

 

Type A Machines

Series 1, Series 1 Pro

Yes

Yes

Yes

Yes

 

Ultibots

D300VS

Yes

Yes

Yes

Yes

 

Ultimaker

Ultimaker 2, 2go, Ultimaker 3, 3+, S5

No

Yes

Yes

No

Uses 2.85 mm filament

Velleman

K8400 Vertex, Vertex Nano

Yes

Yes

Yes

Yes

 

Volumic

Stream 30, Dual

Yes

Yes

Yes

Yes

 

Voxelab

Aquila S2

Yes

Yes

Yes

Yes

 

Wanhao

Duplicator i3, 4S, 6, 9

Yes

Yes

Yes

Yes

 

WASP

Delta 2040, 4070, 60100

Yes

Yes

Yes

Yes

 

Wisemaker

W200

Yes

Yes

Yes

Yes

 

Wombot

Exilis, Modus

Yes

Yes

Yes

Yes

 

XYZprinting

1.0 AiO, Pro, 3-in-1, da Vinci (1.1 Plus, Super, mini w+) da Vinci Jr. (1.0 Pro, WiFi Pro)

Yes (would need to bypass chip system)

Yes

Yes

Yes

 

Yuchu

Yuchu-D 3D, Yuchu-W 3D, Pro

Yes

Yes

Yes

Yes

 

Z-Morph

2.0 SX

Yes

Yes

Yes

Yes

 

Zinter

Architect, Home, Pro II, Zintable

Yes

Yes

Yes

Yes

 

Zonestar

D802, D805

Yes

Yes

Yes

Yes

 

Zortrax

M200

No

Yes

Yes

No

Proprietary filament and uses ZCode. Not yet compatible, but perhaps in the future

ZYYX

ZYYX+

Yes

Yes

Yes

Yes

 

Â