Laser Engraving and Cutting

1 Set Up for First Use

Read the product Quick Start Guide

2 Two Methods to Start Engraving / Cutting

2.1 The Method of Setting Work Origin

You need to find out where the engraving / cutting will be by setting the work origin. The work origin corresponds to the (0, 0) coordinate origin in the software Snapmaker Luban. For detailed instructions on how to set the work origin, please refer to 5 Transfer G-code File to Machine.

Open

Here is the workflow of this method. 

Note 1: Make sure you have worn the Laser Safety Goggles before proceeding.

Note 2: If the focal length is already measured, please skip Measure Focal Length.

Note 3: For detailed instructions on how to Transfer G-code File to Machine, please refer to 5 Transfer G-code File to Machine.

2.2 The Method of Using Camera Capture Feature

The laser module's camera captures photos of the work area, and stitch them together as the background. You don't need to set the work origin, you just need to drag the image to where the engraving / cutting will be on the captured background. For detailed instructions on how to use the Camera Capture feature, please refer to Quick Start Guide (https://snapmaker.com/product/snapmaker-2/downloads).

Open

Here is the workflow of this method.

3 Prepare Files 

Design: You can draw with a pen, design a 2D image with graphic design software such as Inkscape and Adobe Illustrator, or simply select a picture from your smartphone.

Take a Photo: You can get a 2D image of scenes or objects in real life by taking a photo with your smartphone.

Download: You can find various beautiful images online from websites like pinterest.com and vectorstock.com.

4 Generate G-Code

4.1 Generating G-code Workflow

Steps to generate G-code:

Go to Laser G-code Generator -> Select mode to upload -> Set parameters for the image -> Generate G-code.

Note 1: Left-clicking on the image with your computer mouse allows you to change the parameters of the image, right-clicking shows you the context menu.
Note 2: Auto Preview is enabled by default. Snapmaker Luban will automatically generate a new preview image with the new parameters. If you disable this feature, you have to click Preview to see the preview image.

4.2 Engraving and Cutting mode

4.2.1 Engraving mode

B&W, Greyscale, Vector and Text can all be used for engraving.

B&W: The engraved image will be in black and white without any grey color.

Greyscale: The engraved image will be in different shades of grey depending on its original color.

Vector: This effect is used for engraving vector graphics. The engraved image will be in black and white without any grey color.

Text: You can select the font and enter the text as you need. You can also upload your own fonts.

4.2.2 Cutting Mode

The Vector and Text modes both can be used for engraving and cutting. When laser cutting, you can set the Multi-pass and Power settings to a desirable level based on the materials you use.

4.3 Multi-model Engraving/cutting

You can upload multiple files to different modes to engrave / cut them in the same G-code file. For instance, if you have used the Vector mode to upload a SVG file for cutting, you can also use the Greyscale mode for engraving with a PNG file. You only need to set different parameters for individual images to be able to engrave and cut simultaneously.

Note 1: When multiple images overlap each other, you can right click on the images to Bring to Front and Send to Back to select the image you want.
Note 2: When you want to engrave and cut in the same area, we recommend that you engrave first to avoid any loss of engraving quality when the materials become less stable after being cut. You can set the work order by going to Print Order.

4.4 Parameters in B&W Mode

Some parameters in B&W mode are listed below to help you familiarize with their meanings. You can learn about all the parameters by reading the prompts, which will appear when you hover your cursor over the tags in our software.

Invert: Inverts black to white and vise versa.

B&W: Set the proportion of the black color based on the original color of the image. The bigger this value is, the bigger the proportion of the black color will be.

4.5 Parameters in Greyscale Mode

Some parameters in Greyscale mode are listed below to help you familiarize with their meanings. You can learn about all the parameters by reading the prompts, which will appear when you hover your cursor over the tags in our software.

Contrast: The difference between the lightest color and the darkest color. The contrast is more obvious when this value is bigger.

Brightness: The engraved picture is brighter when this value is bigger.

White Clip: Set the threshold to turn the color that is not pure white into pure white. 0 means pure black and 255 means pure white and each of the colors in between is assigned a specific number. If White Clip is set to 88, colors whose number is larger than 88 will be turned into pure white (255).

Algorithm: Choose an algorithm for image processing. See the effect of different Algorithms below.

Floyd-Steinburg:

Jarvis-Judice-Ninke:

Stucki:

Atkinson:

Burkes:

Sierra-2:

Sierra-3:

 Sierra Lite:

5 Transfer G-code File to Machine

5.1 Online Engraving / Cutting

5.1.1 Transfer G-code File via Wi-Fi

1. If the machine is not yet connected to Wi-Fi, please select 

Settings in the main menu, tap Wi-Fi and connect to your network.

1. Before you connect your computer to the machine, make sure both the computer and the machine have connected to the same Wi-Fi. Open Snapmaker Luban and go to Workspace -> Connection -> Select Wi-Fi -> Click -> Select your device -> Click Open -> Tap Yes on the touchscreen.

1. Go to Laser G-code Generator and select Load G-code to Workspace to load the generated G-code to Workspace.

1. If you have already measured the focal length and material thickness, you can enter the thickness in 

Printing Auto Mode.

1. Set a relatively small value (e.g. 1%) for 

Laser Power and turn on the laser beam.

1. Use 

X- / X+ / Y- / Y+ / Z- / Z+ to move the laser dot to where the work origin will be, click Set Work Origin and Run Boundary to check if the work origin is at the right place.

Note: If the work origin is set up incorrectly, please reset the work origin and run boundary again.

1. Click to start engraving / cutting.

Note 1: The computer must be connected to the machine via Wi-Fi throughout the process.

Note 2: You can change the settings for Laser Power and Work Speed during the engraving / cutting process.

Tips: If the material thickness is unknown, you can deselect Printing Auto Mode and change to Printing Manual Mode.

When using the Printing Manual Mode, please do the following:Set a relatively small value (e.g. 1%) for Laser Power and turn on the laser beam -> Use X- / X+ / Y- / Y+ / Z- / Z+ to move the laser dot to where the work origin will be -> Use Z- / Z+ to adjust the height of the laser module until the laser beam is focused down to the smallest spot -> Click Set Work Origin -> Click Run Boundary -> Click to start engraving / cutting.

Note: If the work origin is set up incorrectly, please reset the work origin and run boundary again.

5.2 Offline Engraving / Cutting

5.2.1 Transfer G-code File via Wi-Fi

1. If the machine is not yet connected to Wi-Fi, please select 

Settings in the main menu, tap Wi-Fi and connect to your network.

1. Before you connect your computer to the machine, make sure both the computer and the machine have connected to the same Wi-Fi. Open Snapmaker Luban and go to Workspace -> Connection -> Select Wi-Fi -> Click -> Select your device -> Click Open -> Tap Yes on the touchscreen.

1. Go to Laser G-code Generator and select Load G-code to Workspace to load the generated G-code to Workspace.

1. Go to Workspace and click Send via Wi-Fi.

1. After the machine has received the G-code file, tap 

Yes on the touchscreen to access the preview page for engraving / cutting.
Note 1: If you want to learn more about the Auto Mode and Manual Mode before you start engraving / cutting, you can go to section 6.1 Auto mode and Manual Mode.
Note 2: Files sent via Wi-Fi are saved in the Files -> Local on the touchscreen.

5.2.2 Transfer G-code File via USB Disk

1. Go to Laser G-code Generator and click Export G-code to file to save the file to your flash drive.Note: In order to save G-code as a file, the file extension has to be ".nc".

1. Plug in your Flash drive to the controller of the machine.

1. Tap 

Files in the main menu -> USB, locate the saved G-code file to start engraving / cutting.

Note: If you want to learn more about the Auto Mode and Manual Mode before you start engraving / cutting, you can go to section 6.1 Auto mode and Manual Mode.

6 Common Operations

6.1 Auto Mode and Manual Mode

You can start engraving / cutting by selecting either the Auto Mode or Manual Mode after you tap Next on the preview page using the touchscreen.

Auto Mode
If you have previously measured the focal length and know the material thickness, you can follow the steps in Auto Mode: Enter the material thickness -> Use X- / X+ / Y- / Y+ to move the laser beam to where the work origin will be -> Tap Set Work Origin -> Tap Run Boundary -> Tap Start to start engraving / cutting.

Note: If the work origin is set up incorrectly, please reset the work origin and run boundary again.

Manual Mode
If the material thickness is unknown, you can do the following in Manual Mode: Use X- / X+ / Y- / Y+ / Z- / Z+ to move the laser dot to where the work origin will be -> Use Z- / Z+ to adjust the height of the laser module until the laser beam is focused down to the smallest spot -> Tap Set Work Origin -> Tap Run Boundary -> Tap Start to start engraving / cutting.

Note: If the work origin is set up incorrectly, please reset the work origin and run boundary again.

6.2 Remeasure Focal Length

If you are using Autofocus to measure the focal length, you need to remeasure the focal length under these two circumstances:

Note: You should tap Complete and select Calibration to measure the focal length after loading into the main menu. Please do not click Back to repeat the step.

1. If the machine recognizes the one of the lines on the right as the optimal engraved line, the touchscreen will notify that you should remeasure the focal length.

1. If the machine recognizes one of the lines on the left as the optimal engraved line, the touchscreen will notify that you should remeasure the focal length. And that you should take off the lens hood before remeasuring the focal length.

Warning: Please do not reinstall the lens hood after measuring the focal length, otherwise the lens hood will run into the materials during the engraving / cutting process.

6.3 Manual Focusing

Autofocus is enabled by default when you tap Calibration in the main menu when measuring the focal length. If the camera does not work properly, you can switch to Manual Focusing to measure the focal length: Tap Settings in the main menu -> Tap Laser -> Turn off Autofocus to switch to Manual Focusing under the Laser Settings.

6.4 Modify Laser Focus

If you want to change the focal length, you can select Settings and then Laser -> Modify Laser Focus.

6.5 Adjust Lens Hood

During the laser engraving / cutting process, if you feel that the lens hood is too far from the surface of the material to have the best light-blocking effect, you can follow the steps below to adjust the settings for the lens hood:

1. Read the current value of the focal length displayed on the touchscreen, we will use ‘21mm’ as an example.

1. Swipe left and select 

Controls.

1. Use a blank piece of paper, and use 

X- / X+ / Y- / Y+ / Z- / Z+ to move the laser module to the top of the paper. The machine coordinate of the Z Axis should match the value of the focal length, and both should be ‘21mm’.

1. Turn the lens hood until it is 1mm away from the paper. If you want to check the light-blocking effect, please do so after you wear your Laser Safety Goggles and select 

Power. Set a relatively low value (e.g. 1%) for Laser Power and turn on the laser beam.

6.6 Camera Light

When calibrating the camera or using Autofocus to measure the focal length, you can turn on Camera Light for illumination purposes. It helps with taking photos in areas with low light. Camera Light is enabled by default. You can disable it by going to Settings in the main menu, tap Laser, and turn off Camera Light under Laser Settings.

6.7 Camera Calibration

If you have taken off the laser module and tried to reinstall it, or if you have tried to reassemble the machine, please recalibrate the camera before you start engraving / cutting using the Camera Capture feature.

6.8 Resume Print after Power Loss

You do not need to worry about power loss during the engraving / cutting process if you started the process on the touchscreen. You can recover your job after a power loss by tapping Recover on the touchscreen.