Snapmaker Laser Cutting Settings Guide
The following are recommended starting point settings for Snapmaker Luban for Use with the 1600mw blue spectrum laser.
Make sure that you’ve set the best work origin for laser engraving and cutting. For 1600mW Laser Module, you can use the Fine Tune Work Origin feature to achieve the best cutting result.
The recommended settings might not apply to all situations. Take them as a reference, and you can fine-tune the parameters for your materials
Cork
Bamboo
EVA
Rubber
Acrylic
Corrugated Cardboard
Plywood
MDF
Leather
Sticker
Colored Card