Raptor - CURA Setup

Owned by Imagine That
Dec 04, 2020
2 min read

Files:

Please download and install CURA 4.0.0 from https://github.com/Ultimaker/Cura/tags 

Then open CURA root directory, 

copy "r2_single_extruder.def.json" to "resources->definitions", copy "r2_single_extruder_0.def.json" to "resources->extruders", open Cura 4.0.0 and add printer from the drop list of Other:

Finally import profile "Raptor 2.0.curaprofile" from below page: Recommend Temperature: PLA 190-200C, Bed 50-60C; ABS 220-230C, Bed 90-100C